INSTALLATION

HEAVY-DUTY 125LB (~60KG) TEST ON METAL WALL:
The weight of worker is 125lb. (~60kg). So, you can use our shelves even as a windowsill or a bench if the shelf is mounted on a stone or metal wall.
You can invite a contractor to install a Ponoma® shelves or do it yourself - it is easy!
How to install Ponoma® shelf on drywall and tile over brick, stone wall:
How to install Ponoma® shelf on brick, stone wall
with our standard hardware (customer video):
How to install floating shelves Ponoma® on sheet rock
with SnapToggles® (customer video):
How to install our shelves on tile?
We recommend to cut out tile before installation of heavy-duty Ponoma® shelf for best result:
My custom shelf Ponoma® has deep 4-8 inches.
How to install it ?
You can install shelf Ponoma® with regular screwdriver. But if you bought narrow shelf, e.g. four inches like 30 1/8 x 4 x1 1/2:
- we recommend you to use car screwdriver or bit ratchet to install such narrow shelves Ponoma® with comfort :
How to avoid gaps between shelves and cabinets?
You want place shelves above sink or stove between cabinets:
33 x 10 x 2 1/2 inches shelves Ponoma® placed between cabinets with gaps - customer's contractor used insertions. It looks not so good as variants below, so, measure the distance between cabinets and order a shelf of exactly the right size :
As you can see on photo below, 20x8x2 1/2 inches (cm.51x20,3x6,4) shelf Ponoma® holds 50 lb (2 buckets of water) easily. So, it holds 2.5 lb per inch without any problems, so there's normal load capacity = 50 lb (KG22,5) = 2 buckets of water. How to calculate maximum load capacity of shelf Ponoma®? It should be taken length of shelf in inches and multiply it to 5.For example: shelf Ponoma® 20 inches (cm.51) holds up 20x5=100 lb (KG45) = 4 buckets of water maximally. Most walls will not withstand such a load.
Please note, maximum and normal load capacity are achieved only when used all mounting holes:
You can install shelf Ponoma® using 3 mounting holes only: left-center-right, if you will use it with minimal load:
Please don't forget to check what's behind your wall
before drilling with wire detector:
Ponoma® shelves are non-combustible, and you can use them as a thermal shield to protect your TV or soundbar from heat:
Installation of countertops Ponoma®
STEP 1.
Apply silicone glue (with neutral PH only!) and silicone caulking gun to the
edges of the cabinets edges per instructions on the glue’s packaging.
STEP 2.
Put and stabilize the countertop by applying pressure on the top to prevent it from moving.
STEP 3.
Leave for 1 day and test after that.
Please don't hesitate email us if you have any question about installation process: info@ponomasteel.com